JVC LYT0275-001A manual Troubleshooting, Recording. The effects are

58EN

TROUBLESHOOTING(cont.)

SYMPTOM

17.The Picture Wipe and Dissolve functions do not work.

18.The Picture Wipe function does not work.

19.Even when Slow Shutter is not selected, the image looks like it is activated.

20.There is no strobe when the Classic Film or Strobe mode is activated.

21.White Balance cannot be activated.

22.When shooting a subject illuminated by bright light, vertical lines appear.

23.When the screen is under direct sunlight during shooting, the screen becomes red or black for an instant.

POSSIBLE CAUSES	CORRECTIVE ACTION
17. •The last selected editing	17. • Select Picture Wipe or
scene is ending.	Dissolve before beginning
•At the end of the last selected	recording. The effects are
scene for editing, the Power	then automatically activated
Switch was set to “OFF”.	(☞ pg. 26).
•The power is off.	• Do not turn off the
	camcorder’s power after
	setting Edit-In and Edit-Out
	points, as they will all be
	erased (☞ pg. 26).
	• The camcorder automati-
	cally shuts off after 5
	minutes have elapsed in the
	Record-Standby mode.
	Make sure you continue
	operations within 5 minutes
	after engaging Record-
	Standby mode (☞ pg. 26).
18. •The Slow Shutter mode is	18. • Make sure the Squeeze
activated.	mode, Cinema mode, or
•The Squeeze or Cinema	Slow Shutter mode is not
mode is selected in the	activated when preparing to
Recording Menu.	use the Picture Wipe
	function (☞ pg. 26, 27).
19. •When shooting in the dark,	19. • If you want the lighting to
the unit becomes highly	look more natural, set GAIN
sensitive to light and the	UP to “AGC” or “OFF” in
image takes on an effect	the Recording Menu
similar to Slow Shutter.	(☞ pg. 22).
20. •The Picture Wipe or Dissolve	20. • Do not try to use the Classic
function is in use.	Film or Strobe mode during a
	scene transition (☞ pg. 28).
21. •The Sepia or Monotone	21. • Turn off Sepia or Monotone
mode is activated.	before setting White Balance
	(☞ pg. 28).
22. •This is a result of exceedingly	22.
high contrast, and is not a	————
malfunction.
23. •This is not a malfunction.	23.
	————