JVC LYT0275-001A manual Make Connections, Select Scenes

		Open the
Open the	Yellow	cover.
cover.	to Video	Red to Audio
	Output
		Output R

EN49

MAKE CONNECTIONS

1 CONNECT TO . . .

A JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

B JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR

Connect the editing cable to the R.A.EDIT connector.

To J	To
terminal	S-VIDEO
(JLIP)	OUT

S-Video cable (provided)

Editing cable (provided)

A B

To Remote

PAUSE

White to Audio

Output L

A/V cable (provided)

To AUDIO, VIDEO

and S-VIDEO IN connectors

VCR

C VCR OTHER THAN TYPE A OR B Connect the editing cable to the RM-V712U’s PAUSE-IN connector.

2 PREPARE CAMCORDER

Insert a recorded tape and set the Power Switch to “PLAY”.

3 PREPARE VCR

Turn the power on, insert a recordable tape and engage the AUX mode (refer to VCR’s instructions).

SELECT SCENES

4 START SOURCE PLAYBACK

First set the Power Switch to “PLAY”. Press PLAY (4) and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the camcorder’s remote sensor.

•The Random Assemble Editing Menu appears.

C To PAUSE-IN

TV

T W

DISPLAY

FADE/WIPE PLAY

RM-V712U R.A.EDIT

(provided)ON/OFF

5 EXECUTE FADE/WIPE IN (IF NECESSARY)

Press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You cannot use a Picture Wipe/Dissolve at the beginning of Programme 1.

NOTE:

Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press DISPLAY on the remote control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 38) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press DISPLAY on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.

CONTINUED ON NEXT PAGE