JVC LYT0275-001A Playback Special Effects, Start Playback, Accessmenu Playback Effect Select

PLAY (4) Button

PLAYBACK EFFECT

4OFF

1 CLASSIC FILM

2B/W MONOTONE

3 SEPIA

4 STROBE

5VIDEO ECHO

PLAYBACK EFFECT

Select Menu

Power Switch

EN47

Playback Special Effects

These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.

1 START PLAYBACK

Press PLAY (4).

2 ACCESSMENU PLAYBACK EFFECT SELECT

Point the remote control at the camcorder’s remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears.

3 SELECT PLAYBACK EFFECT

Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears.

NOTES:

● To deactivate the selected effect, press EFFECT ON/OFF

on the remote control. Pressing it again re-activates the

selected effect.

● Repeat from step 2 when you want to change the

selected effect.

● When “MONOTONE” or “SEPIA” is activated, the

Remote sensor

“MULTI 4” and “MULTI 9” Snapshot modes (☞ pg. 21)

are not available.

The effects that can be used during playback are Classic Film, Monotone, Sepia and Strobe. The effects work the same in playback as they did in recording. Refer to page 29 for more information.

T W

PLAY

EFFECT

EFFECT ON/OFF

RM-V712U (provided)