JVC LYT0275-001A manual After Use, Cleaning The Camcorder

Set the Power Switch to “POWER OFF” to turn off the camcorder.

USERMAINTENANCE

LENS COVER Open/Close Ring

BATTERY RELEASE

Set to “POWER OFF”.

PUSH HERE

EN61

After Use

1

2 Press OPEN/EJECT in the direction of the arrow then swing the cover open until it locks. The cassette holder opens automatically. Remove the cassette.

3 Press “PUSH HERE” to close the cassette cover.

4 Slide BATTERY RELEASE to remove the battery pack.

5 Turn the LENS COVER Open/Close Ring to close the lens cover.

OPEN/EJECT switch

Cleaning The Camcorder

		CLEAN EXTERIOR
	1 Wipe gently with a soft cloth.
		•Put cloth in diluted mild soap and wring it well to
		wipe off heavy dirt. Then wipe again with a dry
		cloth.
Remove.		CLEAN LENS
	2 Blow it with a blower brush, then wipe gently with
		lens cleaning paper.
		REMOVE EYEPIECE
	3 Turn the eyepiece counterclockwise and pull it out.
		CLEAN VIEWFINDER
	4 Remove dust using a blower brush.
		RE-ATTACH EYEPIECE
	5 Re-attach the eyepiece and turn it clockwise.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mould may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth refer to the cautions of each product.

●When removing the eyepiece, be sure to hold the viewfinder securely.