![](/images/new-backgrounds/1140885/14088571x1.webp)
36EN
RECORDING![](/images/new-backgrounds/1140885/14088571xi43.webp)
![](/images/new-backgrounds/1140885/14088571xi44.webp)
Advanced![](/images/new-backgrounds/1140885/14088571xi46.webp)
Features
(cont.)![](/images/new-backgrounds/1140885/14088571xi49.webp)
![](/images/new-backgrounds/1140885/14088571xi50.webp)
![](/images/new-backgrounds/1140885/14088571xi51.webp)
Program AE With Special Effects
Power lamp
|
| F |
|
| F |
| |
Y | O |
| 5S |
|
|
| |
A |
|
|
|
L |
|
|
|
P |
|
|
|
Lock Button
Select Dial | Power Switch |
Display
IMPORTANT:
If certain Fades or Wipes (☞ pg. 35) are activated, some modes of Program AE with special effects cannot be used. If you select a mode that is unusable in the current situation, the mode's symbol blinks.
You can choose any one of the effects from the P.AE/ EFFECT Menu.
1 SELECT OPERATION MODE
Set the Power Switch to “ ” or “
” while pressing down the Lock Button located on the switch, and pull out the viewfinder fully or open the LCD monitor fully.
2 ACCESS MANUAL MODE ITEM MENU Press the Select Dial. The Manual Mode Item Menu appears.
3 ACCESS “P.AE/EFFECT” SELECT MENU Rotate the Select Dial to move the highlight bar to “P.AE/EFFECT”, then press it.
FOCUS | AUTO |
EXPOSURE | AUTO |
W. BALANCE AUTO | |
FADER | OFF |
/ WIPE |
|
4P. AE | OFF |
/ EFFECT |
|
FLASH ADJ. | 0 |
END |
|
|
|
P. AE / EFFECT | |
| TWILIGHT |
| SEPIA |
B/W | MONOTONE |
SEL. 4 CLASSIC FILM
STROBE
1 SLOW 4X
2 SLOW 10X
PAUSE
Manual Mode Item Menu
P.AE/EFFECT Menu
4 SELECT MODE
Move the highlight bar to the desired mode by rotating the Select Dial, then press it.
•The P.AE/EFFECT Menu disappears and the selected mode is activated. The symbol of the selected mode appears.
5 DISABLE MODE
To turn off the selected mode,
NOTES:
●Program AE with special effects can be changed during recording or during
●When “DIS” is set to “ON”, “VIDEO ECHO” is disabled.
●Even if you set “DIS” to “ON” (☞ pg. 31) with “CLASSIC FILM”, “STROBE” or “SLOW” activated, “DIS” will be disabled.
The indicator for the selected mode appears, and the selected mode is engaged.