EN73
4
567
USER MAINTENANCE

After Use

1
Turn off the camcorder.
2
Slide OPEN/EJECT in the direction of the arrow, then
swing the cover open until it locks. The cassette
holder opens automatically. Remove the cassette.
3
Press “PUSH HERE” to close the cassette cover.
4
Press the Battery Release Button and remove the
battery pack.

Cleaning The Camcorder

1

CLEAN EXTERIOR

Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry
cloth.
2

CLEAN LCD MONITOR

Press PUSH-OPEN and open the LCD monitor. Wipe
gently with the provided cleaning cloth or a commer-
cially available soft cloth. Be careful not to damage
the monitor. Close the LCD monitor.
3

CLEAN LENS

Blow it with a blower brush, then wipe gently with
lens cleaning paper.
4

PULL OUT VIEWFINDER FULLY

5

TILT VIEWFINDER VERTICALLY

Tilt the viewfinder upward to 90 degrees.
6

OPEN COVER

Open the cover located on the bottom of the
viewfinder.
7

CLEAN VIEWFINDER

Remove dust using a blower brush.
8

PUSH VIEWFINDER BACK IN

Close the cover until it locks in place. Tilt the
viewfinder horizontally, and push it back in.
NOTES:
●
Avoid using strong cleaning agents such as benzine or alcohol.
●
Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
●
Mold may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth refer to the cautions of each product.
Battery Release
Button
Remove.
OPEN/EJECT Switch
PUSH HERE
Cover
PUSH-OPEN Button
Blower brush