![](/images/new-backgrounds/1140885/140885121x1.webp)
Open the cover.
To EDIT | To | To AV OUT | |
|
| ||
| OUT |
|
Audio/Video cable (provided)
Editing
cable cable
(provided) (provided)
Red to
AUDIO R IN
EN61
MAKE CONNECTIONS
Also refer to pg. 50, 51 and 53.
1 CONNECT TO . . .
JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE terminal.
JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT connector.
VCR OTHER THAN TYPE
OR
Connect the editing cable to the
2 PREPARE CAMCORDER
Insert a recorded tape and set the Power Switch to
“ ”.
3 PREPARE VCR
Turn the power on, insert a recordable tape and engage the AUX mode (refer to VCR’s instructions).
To | Yellow to | White to | |
VIDEO | AUDIO L | ||
IN | |||
IN | IN | ||
|
To Remote
PAUSE VCR
To |
|
| TV |
T | W |
DISPLAY |
|
FADE/WIPE | PLAY |
| |
R.A.EDIT | |
(provided) | ON/OFF |
SELECT SCENES
4 START SOURCE PLAYBACK
First set the Power Switch to “ ” while pressing down the Lock Button located on it. Press PLAY (4) and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the camcorder’s remote sensor.
•The Random Assemble Editing Menu appears.
5 EXECUTE FADE/WIPE IN (IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the beginning of Program 1.
NOTES:
●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound
Mode Display, press DISPLAY on the remote control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 48) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press IND. ON/OFF on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.
●When editing on a video unit equipped with DV input connector, the optional DV cable can be connected instead of the
CONTINUED ON NEXT PAGE