![](/images/new-backgrounds/1140885/14088527x1.webp)
14EN
Buckle | 1 |
2
4
3
![](/images/new-backgrounds/1140885/14088527xi50.webp)
![](/images/new-backgrounds/1140885/14088527xi51.webp)
![](/images/new-backgrounds/1140885/14088527xi52.webp)
![](/images/new-backgrounds/1140885/14088527xi53.webp)
![](/images/new-backgrounds/1140885/14088527xi54.webp)
![](/images/new-backgrounds/1140885/14088527xi55.webp)
![](/images/new-backgrounds/1140885/14088527xi56.webp)
![](/images/new-backgrounds/1140885/14088527xi57.webp)
![](/images/new-backgrounds/1140885/14088527xi58.webp)
![](/images/new-backgrounds/1140885/14088527xi59.webp)
GETTING![](/images/new-backgrounds/1140885/14088527xi61.webp)
![](/images/new-backgrounds/1140885/14088527xi62.webp)
STARTED![](/images/new-backgrounds/1140885/14088527xi64.webp)
![](/images/new-backgrounds/1140885/14088527xi65.webp)
(cont.)![](/images/new-backgrounds/1140885/14088527xi67.webp)
![](/images/new-backgrounds/1140885/14088527xi68.webp)
![](/images/new-backgrounds/1140885/14088527xi69.webp)
Shoulder Strap Attachment
1 ATTACH STRAP
Make sure the battery pack or DC cord is removed. As shown in the illustration on left, thread the strap through the low eyelet 1, then fold it back and thread it through the buckle 2.
2 ADJUST LENGTH
Adjust as shown in the illustration on left 3.
3 ATTACH TO THE OTHER EYELET Repeat step 1 to attach the other end of the strap to the other eyelet 4, making sure the strap is not twisted.
Tripod Mounting
1 ALIGN AND TIGHTEN
Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a