JVC LYT0291-001B manual Troubleshooting

70EN

TROUBLESHOOTING(cont.)

SYMPTOM

20.The Picture Wipe and Dissolve functions do not work.

21.The Picture Wipe function does not work.

22.Scene transition does not go as expected.

23.The Video Echo mode does not work.

24.Even when Slow Shutter is not selected, the image looks like it is activated.

25.There is no strobe when the Classic Film or Strobe mode is activated.

26.White Balance cannot be activated.

27.When shooting a subject illuminated by bright light, vertical lines appear.

28.When the screen is under direct sunlight during shooting, the screen becomes red or black for an instant.

POSSIBLE CAUSES	CORRECTIVE ACTION
20. • The last selected editing scene is	20. • Select Picture Wipe or Dissolve
ending.	before beginning recording. The
• At the end of the last selected	effects are then automatically
scene for editing, the Power	activated (☞ pg. 34).
Switch was set to “OFF”.	• Do not turn off the camcorder’s
• The power is off.	power after setting Edit-In and
	Edit-Out points, as they will all
	be erased (☞ pg. 34).
	• The camcorder automatically
	shuts off after 5 minutes have
	elapsed in the Record-Standby
	mode. Make sure you continue
	operations within 5 minutes
	after engaging Record-Standby
	mode (☞ pg. 34).
21. • The Slow Shutter mode is	21. • Make sure the Squeeze mode,
activated.	Cinema mode, or Slow Shutter
• The Squeeze or Cinema mode is	mode is not activated when
selected in the Recording Menu.	preparing to use the Picture
	Wipe function (☞ pg. 31, 37).
22. • When using “Picture Wipe/	22.
Dissolve” (☞ pg. 34) or
“Dissolve during 5 second
mode recording” (☞ pg. 23),
there is a delay of a fraction of a
second between the previous	————
record stop-point and the
Dissolve start-point. This is
normal, but this slight delay
becomes especially noticeable
when shooting fast-moving
subject or during rapid panning.
23. • The Picture Wipe or	23. • Make sure the Squeeze mode is
Dissolve functions are in use.	set to “OFF” (☞ pg. 35).
• The Squeeze mode is selected in	• Do not try to use the Video
the Recording Menu.	Echo mode during a Fade-In or
• A Fade-In or Fade-Out is in	Fade-Out or when Dissolve is
progress (White Fader, Black	activated during 5-second mode
Fader or Black & White Fader).	recording (☞ pg. 33).
• Dissolve during 5-second mode
recording is in use.
24. • When shooting in the dark, the	24. • If you want the lighting to look
unit becomes highly sensitive to	more natural, set GAIN UP to
light and the image takes on an	“AGC” or “OFF” in the
effect similar to Slow Shutter.	Recording Menu (☞ pg. 31).
25. • The Picture Wipe or Dissolve	25. • Do not try to use the Classic
function is in use.	Film or Strobe mode during a
• Dissolve during 5-second mode	scene transition (☞ pg. 23, 33,
recording is in use.	34).
26. • The Sepia or Monotone mode is	26. • Turn off Sepia or Monotone
activated.	before setting White Balance
	(☞ pg. 36).
27. • This is a result of exceedingly	27.
high contrast, and is not a	————
malfunction.
28. • This is not a malfunction.	28.
	————