Trouble
The remote control is not working.
Unable to operate.
No images on the TV.
Playback | Images are distorted |
during | |
| |
|
|
| The images cannot be |
| displayed in the |
| normal aspect ratio. |
|
|
|
|
| Reading fails. |
|
|
|
|
| Playback cannot |
| function properly. |
|
|
| Digest Playback |
| starts when the |
| PREVIOUS / NEXT |
| button is pressed |
| repeatedly. |
|
|
Action
zThe remote control is not operable when the disc tray is opened. Close the disc tray.
zIf the burner does not work at all, remove the power plug and insert again. (It may not function properly due to lightning strike or static electricity.)
zConnect this burner to a TV. (P. 12, 13)
zSwitch to the external output that connects the burner to the TV with a video/audio input connectors.
zAfter pressing the power button, it will take about 25 seconds to display the intermediate screen. (P. 34)
zIf there are too many recorded files or when a disc that is not recommended is used, it will take several minutes to display the playback navigator.
zCheck the resolution setting again. (P. 33)
z Images may be distorted for sections where the playback speed changes. This is not a malfunction.
zWhen both the HDMI terminal and Audio/Video output connectors are connected, set “HDMI VIDEO MODE” in the settings menu to “OFF” to output the images with priority given to the Audio/Video output connectors. (P. 36)
zInsert the disc with the label facing up. zWipe off any dirt that is found on the tray.
zMake sure that the writing surface of the disc is not damaged.
zDo not use deformed discs.
zPlayback of commercial
zAVCHD disc created on a high definition Everio is equipped with the Digest Playback function. If the PREVIOUS / NEXT button is pressed repeatedly during playback, Digest Playback will start when the normal playback ends.
(P. 24)
42
