JVC LYT1942-001A manual Computers That Can Be Used, Removing USB cable from PC

Note	• For details on using Power2Go, refer to the User’s guide, Help and
	Readme files installed with the software. You can access the User’s
	guide, Help and Readme files from the Start menu on the PC.

•To get customer support and to register the software, you need the following product key (CD-Key): PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS

•This burner cannot be used to write files into CD-R or CD-RW discs. Refer to page 51 for the recommended discs.

•This burner does not response to all the functions of Power2Go 5.5 Lite.

•Power2Go 5.5 Lite does not support conversion of audio files to MP3 format.

•When the “Enter Activation Key” screen appears while using Power2Go 5.5 Lite, close the screen without entering the activation key.

o Removing USB cable from PC

ACarry out removing of hardware on the PC.

BRemove the USB cable.

Caution	• To play back disc created on a PC on this burner, follow the following
	procedure.
	Insert the disc into this burner. After disc recognition, press the
	NAVIGATION/TOP MENU button to display the playback navigator.
	(P. 23)
	• For data disc created on a PC, the date and time displayed will not be
	accurate.

EN

ES

Computers That Can Be Used

CyberLink Power2Go 5.5 Lite can be used on computers satisfying the following conditions.

Operating	Windows XP Home Edition (pre-installed)
	Windows XP Professional (pre-installed)
system	Windows Vista Home Basic (32-bit edition, pre-installed)
	Windows Vista Home Premium (32-bit edition, pre-installed)
Connector	USB 2.0/1.1 connector (*)
CPU	Intel Pentium III, at least 800 MHz
	(Intel Pentium 4, at least 2 GHz recommended)
RAM	At least 128 MB (at least 256 MB recommended)
Free hard disk	At least 50 MB for installation
space	At least 5 GB recommended for creating DVDs
Display	Must be capable of displaying 800 x 600 dots

* If you use USB 1.1 cable, it will take approximately 3 hours to write one DVD.

17