(For owners in the U.S.A.)
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
(For owners in Canada)
•FOR USE WITH MODEL NO.
•POUR UTILISER AVEC MODELE
This Class B digital apparatus complies with Canadian
Cet appareil numérique de la classe B est conforme à la norme
The C/B button does not completely shut off mains power from the unit, but switches operating current on and off. ABB shows electrical power standby and ACB shows ON.
Safety Precautions for the Burner
Be sure to observe the following precautions. Failing to do so may result in electric shock, fire, injury, or malfunction.
•Do not disassemble, dismantle, or modify the
equipment. Requests for repair and inspection should be made to the dealer.
•Do not insert metal or combustible objects or pour water or other liquids inside the burner.
•Turn off the power when connecting equipment.
•Remove the plug when the burner will not be used for a prolonged time or prior to cleaning (electricity flows through the equipment even when the power is off).
•Do not block the ventilation holes of the burner.
•Do not use where there is condensation. Suddenly carrying the burner from a cold location to a hot location may result in the formation of drops, which may cause a malfunction or failure.
•Do not cause the burner to vibrate when discs are in.
Safety Precautions for Accessories
•When using the AC adapter, the power cord, and the USB cable, be sure to observe the following precautions. Failing to do so may result in electric shock, fire, injury, or malfunction.
•Do not insert or remove the plug when your hands are wet.
•Fully insert the plug into the outlet.
•Keep dust and metal objects away from the plug.
•Do not damage the cord.
•Place the cord where it will not trip someone up.
•Do not use when thunder can be heard.
•Do not dismantle.
•Do not use for any product other than this one.
•Do not play the provided
player. Doing so may damage the circuits or speakers.
Safety Precautions for Discs
Do not use the following discs.
•Cracked discs
•Deeply scratched discs
Installation
Do not install in any of the following locations.
•Humid location
•Location of 60 °C or above
•Location subject to direct sunlight
•Location where overheating is likely
•Dusty or smoky locations
•Locations subject to oily smoke or steam such as a kitchen counter or beside a humidifier
•Unstable location
•Bathroom
•Dusty places
•Slanted location
ATTENTION:
On placing the unit:
Some TVs or other appliances generate strong
magnetic fields. Do not place such appliances on top of the unit as it may cause picture disturbance.
When moving the product:
Press C/B to turn off the power, and wait at least 30
seconds before unplugging the power cord. Then, wait at least 2 minutes before moving the product.
EN
ES
3
