JVC Model MX-J70J manual Creating Your Own Sound Mode - Manual Mode, Adjust the SEA pattern

Models: Model MX-J70J

1 34
Download 34 pages 3.6 Kb
Page 15
Image 15
2 Adjust the SEA pattern.

While using one of the surround modes

You can adjust the rear speaker output level if the rear speakers are connected. Once you adjust the rear speaker output level for each surround mode, the adjusted level is stored in memory.

You cannot adjust the right and left rear speaker levels separately.

2 Adjust the SEA pattern.

 

 

PRESET

 

 

 

1) Press 4or ¢to select the

 

 

 

 

 

 

frequency range to adjust

 

 

 

(LOW, MID, HIGH).

 

 

TUNING

 

 

2) Press 1or `to adjust the level (–3 to +3) of the selected

On the remote control ONLY: 1 Press and hold SHIFT.

2 Press REAR LEVEL – / + button.

Pressing REAR LEVEL – decreases the output level (from +10 to –10).

Pressing REAR LEVEL + increases the output level (from –10 to +10).

SHIFT

LEVELREAR +

frequency range.

3)Repeat steps 1) and 2) to adjust the level of the other frequency ranges.

3 Press SEA CONTROL again.

SEA CONTROL

SET

3 Release SHIFT.

Creating Your Own Sound Mode — Manual Mode

You can change SEA pattern to suit your preference. These changed settings can be stored in the MANUAL 1, 2, and 3 modes.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

If you want to add the surround elements in your SEA pattern, select one of the surround modes (D.CLUB, HALL, or STADIUM) before starting the procedure below.

On the unit ONLY:

1 Press and hold SEA CONTROL until “SEA CONT” appears on the display. SEA CONTROL

SET

4

Press 4or ¢to select one of the

 

 

MANUAL 1, 2, and 3 modes into which you

 

want to store the SEA pattern.

SEA CONTROL

5

 

SET

Press SEA CONTROL again.

 

SOUND MODE

The SOUND MODE indicator also lights up.

The SEA pattern you have created are stored into the MANUAL mode selected in the above step.

To use your own sound mode

Select MANUAL 1, 2, or 3 mode when using the sound modes. See “Selecting the Sound Modes.”

If you have stored your MANUAL 1, 2, and 3 modes with the surround elements

You can also adjust the rear speaker output level. See “While using one of the surround modes.”

Current level appears.

– 12 –

EN01-13.MX-J70[J]/f

12

99.2.9, 1:31 PM

Page 15
Image 15
JVC Model MX-J70J manual Creating Your Own Sound Mode - Manual Mode, Adjust the SEA pattern, Press 4or ¢to select the