Motorola MICOM-2ES/2RS/2TS ALE manual Receiving Calls in ALE Mode, Receiving an individual call

New ALE Features

Receiving Calls in ALE Mode

When your MICOM 2 receives a call, it displays its type and the source address.

You are also notified when a message is attached: if a	MOTOROLA
	FROM
message is received, the name of the calling station is	!ABC
preceded by an exclamation mark.

For any type of call, if the ALERT attribute is programmed to YES, you will hear the alert tone when a message is received.

➤Receiving an individual call:

When an individual call (i.e., a call addressed only to	MOTOROLA
	FROM
your station) is received, the name of the calling station	ABC
blinks in the display.

	If the calling
	display, <-->
Note	View mode.

station name is too long and does not fit in the appears next to F1. Press <-->(F1) to enter the

➤Receiving a net call:

MOTOROLA

FROM

NET CALL

When an individual call (i.e., a call addressed only to your station) is received, the name of the calling station

MOTOROLA

blinks in the display.FROM ABC

➤Receiving an AllCall:

	You can program your radio to ignore incoming AllCalls. If the
	radio is set to ignore incoming AllCalls, it stops scanning when an
	AllCall is received but it does not display, nor lets you hear the
Note
	call. At the end of the AllCall, the radio automatically returns to
	the scanning mode.

	MOTOROLA
	ALE
When an AllCall is received, the display flashes an	ALLCALL
AllCall alert that alternates ALLCALL with the calling	FROM
station name.
	MOTOROLA
	ABC

_________________________________________________________________________________________________ 17