Entering the ALE Mode
To use the ALE mode, first it must be enabled as explained below.
Enabling the ALE Mode
➤To enter the ALE mode:
1.Press MENU to display the Menu screen.
| If you see SCAN next to F3, first |
| enable the ALE functionality using |
Note | PROG>RAD>OPTS>ALE. |
|
MOTOROLA
MENU
CHAN FREQ ALE BITs
| MOTOROLA |
2. Press ALE (F3). | ALE |
The last active net flashes in the display. | NET 7 |
|
3.To use the displayed net, press ENTER. To select another net:
•Press the UP/DOWN keys until you reach the required number.
or
•Use the keypad to enter the desired net number.
The new net number blinks, indicating that the selection has not yet been confirmed.
4. Press ENTER to confirm your choice. The radio then starts scanning the channels in the selected net (the changing channel number appears to the right of the net number).
ALE and Rx Only or Tx Only Channels
1
MON
The radio will prevent users from performing calls on Rx only or Tx only channels. This is true even when operating in the Channel mode: when selecting a Rx Only or Tx Only channel, the ALE option is disabled (the CALL (F1) key is not displayed when such a channel is selected).
ALE Programming
ALE supports many features, including:
•Various type of calls
•Up to 20 nets, each with its own set of members and associated frequencies (channels)
14_________________________________________________________________________________________________