While the radio is initializing the link, you can press STOP (F1) or ESC to abort the entire process.
Note
6.After the link is established, you will see a LINK message. Now you may press the PTT and start talking.
7.To disconnect the link, press the ESC key.
Quick Call
A quick call is a call to the last station you tried to call (regardless of whether the call was successful or not). In the ALE mode, the channel used for the original call is reused for the quick call.
The Quick Call feature can be enabled or disabled as part of ALE parameters programming.
|
|
|
|
| • | Quick Call will not transmit a message, even if the last call |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
| contained a message. |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| • | The first time the station is switched to the ALE or Channel |
Notes | ||||||
|
|
|
|
|
| mode, quick call is not possible as no "most recent" station |
|
|
|
|
|
| data exists. |
➤To send a quick call:
The radio automatically tries to contact the last called station.
During this process, you will see TO alternating with the number of the channel on which the set up request is being sent (the channel may change, if the called station does not answer on the first channel(s)).
| While the radio is initializing the link, |
| you can press STOP (F1) or ESC to |
Note | abort the entire process. |
|
MOTOROLA
TO 1234
STOP PAGE CHAN | MONs |
MOTOROLA |
|
CH 2 |
|
1234 |
|
STOP PAGE CHAN | MONs |
28_________________________________________________________________________________________________
