New ALE Features
Using Autodial
The Autodial feature lets you use a single digit to call a preprogrammed address. There are ten programmable Autodial addresses, where each can include a message.
See Auto Dial Parameters on page 61 for details on programming the Autodial list.
➤To use Autodial to send a call:
| MOTOROLA |
| CALL |
1. Press # on the keypad. | SELECT#_ |
If you do not select an
Note
2.Press the desired preprogrammed Autodial number (0 to 9).
The programmed address is immediately displayed; if a message is preprogrammed, an exclamation sign will appear before the station name.
Press PAGE (F2) if you want to attach a message to the call or to replace/edit a preprogrammed attached message. See page 30.
MOTOROLA
CALL 1009
SEND PAGE CHAN MONs
If the Autodial number you enter is not programmed, the message NOT PROG will be displayed.
Note
3.Press CHAN (F3) if you want the call to be initiated on a specific channel. See page 30.
4.Press ENTER or SEND (F1) to start the call.
5.The radio now starts the link set up process. During this process, you will see TO alternating with the number of the channel on which the set up request is being sent (the channel may change, if the called station does not answer on the first channel(s)).
While the radio is initializing the link, you can press STOP (F1) or ESC to abort the entire process.
Note
_________________________________________________________________________________________________ 29
