ALE Programming
ALE Programming
This section provides concise instructions for using the ALE Programming mode. This mode, reached under the PROG menu (see Figure 4 and Figure 5) is used to configure the parameters needed by the ALE function. The ALE parameters are identified in Figure 5.
The Programming mode is accessible only if the radio is not locked.
Note
After locating the required ALE parameter in the Programming menu, you can change it by pressing the function key next to the parameter name, and then press the UP/DOWN keys to scroll or set parameters.
➤To enter the ALE Programming mode:
1. Press MENU to display the Menu screen.
MOTOROLA
MENU
CHAN FREQ ALE BITs
MOTOROLA
2. Press MORE to scroll to the second Menu screen.
MENU
LOCK PROG PSW DIMs
3.Press PROG (F2).
4.Press ALE (F2) to enter the ALE Programming mode.
5.Press MORE as required to access additional ALE programming parameters.
MOTOROLA
PROG
RAD ALE LANG
MOTOROLA
ALE PROGRAMMING
NET DIR AMD OPTs
In the ALE Programming mode, you can program the following features (see also Figure 5).
•NET
•RCV
Description | See Page … |
Net parameters: station names, options, members | 54 |
and scanned channels. |
|
Edit the list of stations not appearing in the | 58 |
directory from which calls have been received. |
|
This item is displayed only after such calls have |
|
been received, and therefore will not appear when |
|
the |
|
_________________________________________________________________________________________________ 53
