JVC Model MX-J70J manual Adjusting the Front Speaker Output Balance, Selecting the Sound Modes

Models: Model MX-J70J

1 34
Download 34 pages 3.6 Kb
Page 14
Image 14
To turn down the volume level temporarily FADE
SOUND MODE

To turn down the volume level temporarily FADE

MUTING

Press FADE MUTING on the remote control. The volume level gradually decreases to “0.”

To restore the sound, press the button again.

Adjusting the Front Speaker Output Balance

Selecting the Sound Modes

You can select one of the 6 preset sound modes (3 surround modes and 3 SEA – Sound Effect Amplifier – modes). The sound modes can be applied only to playback sounds, and cannot be used for recording.

To select the sound modes, press SOUND MODE SOUND

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

until the sound mode you want appears on the display. The SOUND MODE indicator also lights up on the display. Adjusting the Front Speaker Output BalanceSelecting the Sound ModesOn the remote control ONLY: 1 Press and hold SHIFT.

MODE

On the remote control ONLY: 1 Press and hold SHIFT.

2 Press BALANCE L/R button.

SHIFT

L BALANCE R

Each time you press the button, the sound modes change as follows:

2 Press BALANCE L/R button.D.CLUB 3 Release SHIFT.HALL Reinforcing the Bass SoundSTADIUM SOUND MODEROCK

Pressing BALANCE L decreases the right channel output.

Pressing BALANCE R decreases the left channel output.

3 Release SHIFT.

Reinforcing the Bass Sound

The Signal Adaptive Bass function provided for this unit can enhance the bass sound and reduce the bass sound distortion while listening to any source at low volume.

You can use this function only for playback.

To turn on the function, press S. A. BASS

S. A. BASS

repeatedly until “SA-BASS1” or “SA-BASS2”

 

appears on the display.

 

The S. A. BASS lamp (the button itself) also lights up.

Each time you press the button, the Signal Adaptive Bass level applied to the playback sound changes as follows:

– 11 – SA-BASS1 Manual background SA-BASS2

OFF Manual background

(Canceled)

When you select “SA-BASS2,” the bass sound level is enhanced much more than when you select “SA-BASS1.”

While playing back some sources, the level difference between “SA-BASS1” and “SA-BASS2” may not be distinct.

To turn off the function, press the button repeatedly until “OFF” appears on the display.

If you want to check the Signal Adaptive Bass level currently selected

While the S. A. BASS lamp is lit, press S. A. BASS once so that the current level appears for a while.

(Dance CLUB)

POP

OFF

 

 

 

 

 

 

 

 

(Canceled)

 

CLASSIC

 

 

 

 

 

 

 

 

MANUAL3

 

 

 

 

 

 

 

 

MANUAL2

 

MANUAL1

 

 

 

 

 

 

 

 

Surround modes *:

D.CLUB: Increases resonance and bass.

HALL: Adds depth and brilliance to the sound.

STADIUM: Adds clarity and spreads the sound, like in an outdoor stadium.

SEA modes:

ROCK: Boosts low and high frequency. Good for acoustic music.

POP: Good for vocal music.

CLASSIC: Good for classical music.

Manual modes:

MANUAL1/2/3:

Your individual mode stored in memory. See “Creating Your Own Sound Mode — Manual Mode.”

OFF: Cancels the sound mode.

*Surround elements are added to the SEA elements to create a being-there feeling in your room. You can hear surround sounds from the rear speakers if connected.

When one of these modes is selected, the SOUND MODE

indicator lights up as —

SOUND MODE

While one of the SEA modes including manual modes (SEA elements without surround elements) is selected,

it lights up as —

– 11 –

EN01-13.MX-J70[J]/f

11

99.2.9, 1:31 PM

Page 14
Image 14
JVC Model MX-J70J manual Adjusting the Front Speaker Output Balance, Selecting the Sound Modes, Reinforcing the Bass Sound