NEC NEAX 2000 specifications Volume Control

PROPRIETARY MULTILINE TERMINAL

Volume Control

Volume Control

General Description

Multiline Terminals are equipped with common Volume Control keys for:

•Built-in Speaker / Handset Receiver Volume

•Ring Volume

•C.O. Transmission Level

•LCD contrast

•Ring Tone Frequency

The Volume Control keys are located on the lower front side of Multiline Terminals (UP ↑ and DOWN ↓ ).

Station Application

All Multiline Terminals.

Operating Procedure

Built-in Speaker/Handset Receiver Volume

•While in an off-hook state, press the ↑ (UP) key to increase the volume, or the ↓ (DOWN) key to decrease the volume.

Ring Volume

1.Press the Feature key followed by 0: receive a test ring tone from the built in speaker.

2.Press the ↑ (UP) key to increase the volume, or the ↓ (DOWN) key to decrease the volume.

3.Press the Feature key, or lift the handset and restore the handset, to return to idle.

OR

When in a ringing state, press the ↑ (UP) key to increase the volume, or the ↓ (DOWN) key to decrease the volume.

C.O. Transmission Level

•While connected to a trunk, press the Feature key followed by 2 or 4: Feature key + 2 : +5 dB (receiving) /+3dB (sending)

Feature key + 4 : +5 dB (receiving) /No gain (sending)

LCD contrast

•While in an on-hook state, press the ↑ (UP) key to decrease the contrast, or the ↓ (DOWN) key to increase the contrast.

Service Conditions

1.The Speaker/Handset volume control adjusts the volume of voice calls over the speaker/handset receiver, and any tone sent by the system when using the speaker or handset.

2.The ring Volume Control adjusts the volume of all ring tones to the Multiline Terminal.

	NEAX2000 IVS2
Page 266	Business/Hotel/Data Features and Specifications
	NDA-24271, Issue 1.0