![](/images/new-backgrounds/1150682/150682489x1.webp)
MESSAGE WAITING
4. Restore the handset.
REC COMPLETE XXX
1:34 PM FRI 12 APR 1999
(XXX=Card No.)
•To set while receiving ringback tone or busy tone or performing voice call (from the Attendant Console)
1.Dial "8"; receive service set tone for 3 seconds.
2.Press the RELEASE key or CANCEL key.
• To retrieve a message (from a Single Line Telephone)
1.Lift the handset and receive dial tone.
2.Dial the Voice Message Waiting - Individual retrieve access code.
3.Listen to the message.
4.Restore the handset.
• To retrieve a message (from a Multiline Terminal)
1.Press the Speaker key or lift the handset and receive dial tone.
2.Press the MSG key.
3.Listen to the message.
4.Press the Speaker key or restore the handset.
Service Conditions
Message Waiting
1.When Check Out is performed, any remaining messages will be output to the printer and cleared from mem- ory.
2.The Message Waiting function can be set even when the guest station is busy. The Message Waiting lamp will not light while the guest station has the handset in use (on Single Line Telephones).
3.Message Waiting status is displayed by the Message Waiting lamp on Single Line Telephones or Multiline Terminals.
4.Message Waiting can be automatically cleared by talking to the Attendant Console or the Hotel/Motel Front Desk Instrument (on a system basis). If Message Waiting is not automatically cleared, the reset operation is required.
5.A 4LCD/8LC card is required to provide Single Line Telephones with the Message Waiting function. Sin- gle Line Telephones must be equipped with Message Waiting lamps for 70VDC.
6.When multiple Message Waiting indications are initiated from various points (Attendant Consoles, Front Desk Instrument, other stations, etc.), clearing one message will remove the Message Waiting indication.
7.The flashing rate for the Message Waiting lamp on the Multiline Terminal is selected on a
| NEAX2000 IVS2 |
Page 222 | Business/Hotel/Data Features and Specifications |