NEC NEAX 2000 specifications To end a Conference call release CFT trunk

CONFERENCE (SIX/TEN PARTY)

3.After the party answers, press the Hold key.

4.Call all desired parties (station or C.O./Tie line) sequentially, using other line keys, and placing each on hold after the party answers.

5.After holding the last party, press the Conference feature key. The line key associated with the last party lights green. The last party is connected to the CFT trunk.

6.Sequentially press the holding line keys to connect the participants to the CFT trunk.

OR

1.(Conference leader:) Press the line key and then press the Conference feature key. The Conference feature key lights red.

2.Dial the number of the first party (station or C.O./Tie line) to be added to the conference.

3.After the party answers, press the Conference feature key. The line key lights red, and the Conference fea- ture key lights green. The first party is connected to the CFT trunk.

4.Press the Hold key. The Conference feature key flashes red.

5.Sequentially call all desired parties (station or C.O./Tie line) by using other line keys, and then connect them to the CFT trunk by pressing the Conference feature key after each party answers.

• To release a participant

1.(Conference leader:) Go on-hook. The Conference feature key lights red.

2.Go off-hook and press the line key associated with the participant to be released. The participant is released from the CFT trunk and is connected to the leader.

3.Go on-hook, and the participant is released.

4.Go off-hook and press the Conference feature key. The Conference feature key lights green.

5.The leader returns to the CFT trunk.

To end a Conference call (release CFT trunk)

CFT trunk is automatically released when only one participant remains connected.

Service Conditions

1.Access codes A, B and C must be different numbers. A is used to reserve the Conference board. B is used to add Conference member. C is used to force release a member from the Conference.

2.Up to four CFT trunks can be accommodated in the system.

3.The maximum number of participants which can be connected in a Conference call is:

•Six participants (inclusive of the leader) when one CFT trunk is used

•Ten participants (inclusive of the leader) when two CFT trunks are used

4.The maximum number of Conference groups per system when using four CFT trunks (maximum) is:

•Four, 6-party Conference groups

•Two, 10-party Conference groups

•Two, 6-party Conference groups and one, 10-party Conference group

5.A CFT trunk is used for either a 6-party or 10-party Conference. Dialed access codes determine which CFT trunk is used for a Conference. If the leader dials the access code for a 10-party Conference when only one CFT trunk is idle, the leader is restricted and hear reorder tone.

NEAX2000 IVS2
Business/Hotel/Data Features and Specifications	Page 121
NDA-24271, Issue 1.0