MESSAGE WAITING
MESSAGE WAITING
General Description
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument, administrative station, or Property Management System (PMS) terminal to light a lamp (on an uninterrupted or interrupted basis) on a Single Line Telephone or Multiline Terminal to indicate a message is waiting.
In addition to the lamp indication control, this feature also provides the Voice Message Waiting service that an originating station user can set the Message Waiting with a prerecorded message by using the Digital Announce- ment Trunk (DAT) circuit.
•Voice Message Waiting - System
An originating station user can choose the prerecorded message to be set by dialing the message number associated. The messages are recorded by the predetermined station.
•Voice Message Waiting - Individual
When setting Message Waiting, an originating station user announces the message to be recorded after di- aling the station number.
Station Application
All stations.
Operating Procedure
From the Hotel/Motel Front Desk Instrument
• To set Message Waiting
1.Press the MW key.
2.Dial the desired station number.
3.Press the SET key.
4.The above two steps can be repeated for additional stations.
5.Press the RELEASE (RLS) key.
• To cancel Message Waiting
1.Press the MW key.
2.Dial the desired station number.
3.Press the RESET key.
4.The above two steps can be repeated for additional stations.
5.Press the RELEASE key.
• To set Message Waiting while receiving ringback tone or busy tone
1.Press the MW key.
2.Press the SET key.
3.Press the RELEASE key.
| NEAX2000 IVS2 |
Page 218 | Business/Hotel/Data Features and Specifications |
