![](/images/new-backgrounds/1150682/150682335x1.webp)
DIRECT INWARD TERMINATION (DIT)
DIRECT INWARD TERMINATION (DIT)
General Description
This feature automatically routes incoming network exchange calls directly to a preselected station without At- tendant assistance. The call can then be processed by the called party.
Station Application
All stations.
Operating Procedure
No manual operation is required.
Service Conditions
1.Bothway trunks can be used for Direct Inward Termination, but incoming only trunks are recommended. This minimizes DIT calls meeting busy conditions.
2.If there is no answer at a station, the calling party will continuously receive ringback tone. Call Fowarding - No Answer will occur if set or the calling party will be transferred to the Attendant or Trunk Answer any Station by system programming if enabled.
3.Once a call is answered, it can be processed by the called station in the same way as any normal trunk call.
4.If the DIT is assigned to a pilot number of a Station Hunting group or Automatic/Uniform Call Distribution (ACD/UCD) group, the incoming call will follow the hunt group station assignment. If the station is Call Forwarded, the incoming call is connected to the Call Forward target station according to the types of Call Forwarding set and the condition of the DIT station.
5.This feature is normally utilized where
6.Multiple trunks can be assigned to Direct Inward Terminate to an extension, but a trunk cannot be assigned to Direct Inward Terminate to multiple extensions.
7.When the Direct Inward Termination station is busy, the call can be preprogrammed to either go to the At- tendant, Trunk Answer any Station, or
NEAX2000 IVS2 |
|
Business/Hotel/Data Features and Specifications | Page 145 |