
TRUNK-TO-TRUNK CONNECTION
General Description
This feature provides any station user with the ability to conference together two outside trunk calls and abandon the connection without dropping the
Station Application
All stations.
Operating Procedure
To establish a
1.Press the FLASH key (or momentarily press the hookswitch). The original call is placed on Consultation Hold and feature dial tone is received.
2.Dial the applicable trunk access code.
3.Dial the desired number and wait for the party to answer.
4.Press the FLASH key (or momentarily press the hookswitch). A Conference is now in progress.
OR
Restore the handset. The original caller and the second party are now connected.
To establish a
1.Press the Transfer key. The original call is placed on Consultation Hold and feature dial tone is received.
2.Dial the applicable trunk access code.
3.Dial the desired number and wait for the party to answer.
4.Press the Conf key. A Conference is now in progress.
OR
Restore the handset. The original caller and second party are now connected.
To establish a
1.Attendant answers an incoming call.
2.Dial the applicable trunk access code. The original party is placed on Consultation Hold.
3.Dial the desired number.
4.Press the RLS key. The original caller and second party are now connected.
Service Conditions
1.The initiating station may hang up at any time. The additional two parties will not be disconnected.
2.At least one of the two trunks must provide a release signal (some loop start trunks do not provide any signal after the distant party abandons the call).
3.This feature may be restricted to individual stations in system data programming.
4.If an originating Single Line Telephone encounters a busy or no answer condition after dialing out to Con- ference a third party, the originating party can be reconnected to held caller by providing a hookflash or by pressing the FLASH key to establish a Conference, and a second hookflash to release the last party called.
| NEAX2000 IVS2 |
Page 314 | Business/Hotel/Data Features and Specifications |