GROUP CALL
Automatic Conference (6/10 Party)
GROUP CALL
Automatic Conference (6/10 Party)
General Description
This feature allows a Multiline Terminal user or single line telephone user within the system to establish a con- ference among as many as six or ten parties. From a Multiline Terminal /Single Line Telephone, a maximum of 9 stations can be paged simultaneously plus the originator. The stations are assigned to the simultaneous paging groups as a participants by the system data beforehand.
Station Application
All Stations.
Operating Procedure
To make a conference call
1.Press the speaker key or go off hook, and receive a dial tone.
2.Dial the access code, or press feature access key (Multiline Terminal only), for a desired paging group and receiver a ringback tone.
To answer the paging
1.The called terminals receive ringing. The LCD of the Multiline Terminal shows Paging, plus the station number of the originator.
2.Answer the ringing page from the originator.
3.You can converse with the originator and other participants.
To participate in the middle of the conference
1.Press the speaker key or go off hook, and receive a dial tone.
2.Dial the access code, or press feature access key (Multiline Terminal only), for
Service Conditions
1.A maximum of nine stations are paged simultaneously including the originator.
Even if more than nine stations are assigned to one group, the first nine stations are paged in order of regis- tered number on the system data.
2.Single Line Telephones, Multiline Terminals, can be assigned as the stations within the conference groups (Virtual line cannot be assigned). A station can belong to multiple groups.
3.Up to eight groups can be assigned as conference groups by system data.
4.The maximum number of participants which can be connected in a conference is:
•Six participants (Inclusive of the leader) when one CFT trunk is used.
•Ten participants (inclusive of the leader) when two CFT trunks are used.
| NEAX2000 IVS2 |
Page 174 | Business/Hotel/Data Features and Specifications |
