NEC NEAX 2000 specifications Service Conditions

ATTENDANT ASSISTED CALLING

Service Conditions

1.During delay operation, the Attendant may release the connection either before or after the called station answers.

2.If the call was processed using non-delay or passing dial tone operation, there will not be an Automatic Re- call for Station-to-Trunk calls when the called party does not answer.

3.If the call was processed using non-delay or passing dial tone operation, an Automatic Recall will be initi- ated for Station-to-Tie line and Trunk-to-Tie line calls when answer supervision is provided on the tie line and the called party does not answer.

4.Fully restricted station users cannot be connected by the Attendant to an outside line using this feature. At- tempts are routed to reorder tone.

5.Non-delay operation allows the Attendant to place an outgoing call for a station user who reached the At- tendant by dialing 0, without requiring the station user to hang up. Delay operation requires that the station hang up.

6.When an Attendant attempts to set up a Trunk-to-Trunk Connection between trunks that do not provide an- swer supervision, the connection is denied and the RELEASE key has no effect.

7.The Attendant can dial the called number for the station user or, using the passing dial tone method, allow the station user to dial.

8.When Least Cost Routing (LCR) is programmed, the Attendant cannot pass dial tone. The call must be com- pleted using delay or non-delay operation.

9.The Attendant cannot pass dial tone to a station whose route restriction class prevents the station from re- ceiving incoming calls on the trunk route selected.

NEAX2000 IVS2
Business/Hotel/Data Features and Specifications	Page 17
NDA-24271, Issue 1.0