NEC NEAX 2000 specifications Call Park System

CALL PARK

Call Park - System

CALL PARK

General Description

This feature enables a station user or attendant to place a call into predesignated Call Park locations. The station user or attendant is then free to process other calls. This feature is available system wide and for individual ten- ants.

Call Park - System

General Description

When a call is parked by Call Park-System, the call can be retrieved from Call Park by any station in the system.

Station Application

All stations and Attendant Consoles.

Operating Procedure

To place a call into Call Park-System

• From a Single Line Telephone

1.Press the FLASH key (or momentarily press the hookswitch) and receive feature dial tone.

2.The call in progress is placed on Consultation Hold.

3.Dial the Call Park-System feature access code.

4.Dial the Call Park-System location number (00-19) and receive service set tone. (If the Call Park number is busy, dial another location number using the Step Call feature until an idle park location is accessed).

5.Restore the handset.

• From a Multiline Terminal with LCD

1.Press the Transfer key and receive feature dial tone.

2.The call in progress is placed on Consultation Hold.

3.Dial the Call Park-System feature access code. The first available Call Park location is selected by the sys- tem and displayed in the LCD. Receive service set tone.

4.Restore handset.

OR

1.Press the Call Park-System feature key and receive service set tone.

2.Restore the handset.

• From a Multiline Terminal without LCD

1.Press the Transfer key and receive feature dial tone.

2.The call in progress is placed on Consultation Hold.

3.Dial the Call Park-System feature access code, or press Call Park-System feature key.

NEAX2000 IVS2
Business/Hotel/Data Features and Specifications	Page 93
NDA-24271, Issue 1.0