AUTOMATIC WAKE-UP
7.When Automatic Wake-Up call is received, the station receives music or an announcement. A DAT circuits of MP card or a 2DAT/4DAT card or COT card (with locally provided music or announcement source) is required. As an option, a PN-DK00 (or built-in DK00 in MP) can be programmed to provide a contact clo- sure for starting the external announcement or music source when used with a COT card. When providing the internal announcement via a DAT card, multiple connections can be made to the announcement card. Secondary station users may be connected to the middle of the message.
8.Data for Automatic Wake-Up programming is canceled by Check Out operation.
9.The number of Automatic Wake-Up call attempts is programmable from 1 to 5 times.
10.If the station does not answer, is busy, in Line Lockout, or ringing, recalling is initiated one minute later. Recalling is repeated up to 5 times. Each call which fails is printed. When the final attempt results in failure, a buzzer is sounded at the printer and a flashing LED on the DSS/BLF Console is available to indicate which station does not answer.
11.An AP00 card is required for connection to a printer.
12.After Automatic Wake-Up is set, the Hotel/Motel Front Desk Instrument is able to verify the setting on re- quest. The Automatic Wake-Up set procedure is followed, but a new wake-up time setting need not be en- tered.
13.Automatic Wake-Up calls will not be rerouted by Call Forwarding or other features.
| NEAX2000 IVS2 |
Page 64 | Business/Hotel/Data Features and Specifications |
NDA-24271, Issue 1.0 |
