
ATTENDANT CONSOLE
Pushbutton Calling – Attendant Only
6.The system operates only on a
7.To place a multiple console system (or a multiple console tenant group) into Night Service, a prepro- grammed master console must press the MODE, NITE and Answer key (press Night key for SN716 DESKCON). If one of the other consoles enters Night Service, all calls addressed to that console will be directed to the other console(s).
8.When a console has entered Night Service, all calls already connected to its loop must be processed from that console. Recalls and serial recalls are routed to the night transfer station, if assigned.
Pushbutton Calling – Attendant Only
General Description
This feature permits an operator to place all calls over
Operating Procedure
The operator presses the
Service Conditions
1.This feature requires that all Central Office trunks or tie trunks accept
2.
Serial Call
General Description
This feature is activated by the Attendant when an incoming calling party wishes to speak with more than one internal party. When the internal station subsequently disconnects from the C.O. line call, the C.O. party auto- matically rings back to the same Attendant.
Operating Procedure
1.The Attendant answers an incoming C.O. call.
2.The Attendant extends the call to the desired station.
3.The Attendant presses the SERIAL CALL SET (SC) key.
4.The called station and incoming caller are connected.
5.The called station hangs up. The Serial Call Termination (SRL) LED on the Attendant Console flashes at 60 IPM. If the Attendant is available, an audible indication is provided.
6.The Attendant presses the Answer or SRL key to return to the original incoming calling party.
Service Conditions
1.Serial Calling is not provided for
2.Serial Calling can be enabled or disabled on a
NEAX2000 IVS2 |
|
Business/Hotel/Data Features and Specifications | Page 39 |