CALL FORWARDING
Call Forwarding – No Answer
5. Replace the handset or press the Speaker key.
• To cancel Call Forwarding – No Answer
1.Lift handset or press Speaker key and receive dial tone.
2.Press the Call Forwarding – No Answer feature access key and receive special dial tone. Press the * key, the associated LED goes out and service set tone is received. The LCD displays CANCEL.
From a Single Line Telephone
• To set Call Forwarding – No Answer
1.Lift handset and receive dial tone.
2.Dial Call Forwarding – No Answer feature access code and receive feature dial tone.
3.Dial the desired target station number and receive service set tone.
• To set Call Forwarding – No Answer – Outside
1.Lift the handset and receive Dial Tone.
2.Dial Call Forwarding – No Answer feature access code and receive feature dial tone.
3.Dial the trunk access code and the desired telephone number.
4.Wait until service set tone is received.
5.Replace the handset.
• To cancel Call Forwarding – No Answer
1.Lift handset and receive dial tone.
2.Dial specific Call Forwarding – No Answer cancellation code and receive service set tone.
Service Conditions
1.An unlimited number of stations can set Call Forwarding – No Answer at one time.
2.Stations are allowed/disallowed this feature by Class Of Service in system programming.
3.Call Forwarding – No Answer can be provided on a system and an individual basis.
4.Call Forwarding on a system basis allows Direct Inward Dial (DID) calls or Tie Line calls which encounter a
5.Individual Call Forwarding – No Answer settings take precedence over system Call Forwarding – No An- swer settings.
6.Call Forwarding – No Answer timing, flexible in system programming, is as follows:
•For direct incoming calls (DID, DIT, Tie) – 4 to 120 seconds (Default:
•For internal calls and transferred incoming calls – 4 to 120 seconds (Default:
7.More than one call forward can occur in the progress of a call. See Multiple Call Forwarding – All Calls, Multiple Call Forwarding – Busy Line and Multiple Call Forwarding – No Answer.
8.Call Forwarding – Busy Line can be set simultaneously with this feature to result in Call Forwarding Busy/ No Answer. Call Forwarding Busy Line and Call Forwarding – No Answer can be set to the same or differ- ent extensions.
9.When Call Forwarding – No Answer – Outside is set, the system can be programmed to allow or deny the setting of the Call Forward with only a trunk access code. This can be set on a
| NEAX2000 IVS2 |
Page 80 | Business/Hotel/Data Features and Specifications |
