ATTENDANT CONSOLE
Attendant Do Not Disturb Setup And Cancel
Attendant Do Not Disturb Setup And Cancel
General Description
The Attendant has the ability to enter and remove individual stations from Do Not Disturb (DND). Additionally, the Attendant can set one preassigned group of stations into, or out of, Do Not Disturb.
Operating Procedure
To set an individual station in DND
1.Dial the station number without pressing the LOOP key.
2.Press the DD key and the associated LED flashes.
3.Press the Answer key (or START key). The DD LED lights steady and service set tone is received.
4.Press the RELEASE key.
To cancel an individual station in DND
1.Dial the station number without pressing the LOOP key.
2.Press the DD key and the associated LED flashes.
3.Press the RESET key and the DD LED goes out.
To set the group of stations in DND
1.Press the DD key and the associated LED flashes.
2.Press the Answer key (or START key) and the DD LED lights steady.
3.The designated group is now in DND.
To cancel DND set to the group of stations
1.Press the DD key and the associated LED flashes.
2.Press the RESET key and the DD LED goes out.
3.The designated group is no longer in DND.
To call a station that set DND
1.Press an idle LOOP key.
2.Dial the desired station number. The DD LED flashes and reorder tone is received.
3.Press the DDOVR key.
4.The desired station will ring.
Service Conditions
1.Refer to the Do Not Disturb feature for more details.
2.Stations are assigned to the DND group in station Class of Service either from the CAT or MAT.
3.The Attendant Console is able to verify and change the status of stations with respect to Do Not Disturb.
4.DND Override allows the Attendant to call stations in DND without changing their status.
NEAX2000 IVS2 |
|
Business/Hotel/Data Features and Specifications | Page 25 |
