CALLER ID CLASS
CALLER ID CLASS
General Description
This feature receives the calling subscriber’s name and number sent from a public network using a MODEM signal and displays the name or number on an LCD of a Multiline Terminal and an Attendant Console.
Station Application
All Multiline Terminals with an LCD and Attendant Consoles.
Operating Procedure
To display the calling subscriber’s name or number when receiving/answering a call
No manual operation is required.
In case of receiving both the name and the number, it can be specified by system programming which one has priority for display.
To change the name/number display
Every time the Name/Number Display Change key is pushed on the Multiline Terminal or the Attendant Con- sole, the name and number are shown alternately.
To store the subscriber’s number for Save & Repeat feature
During a call, push the S&R (Save & Repeat) 0/1/2 key.
The S&R lamp lights if the number has been stored.
In the case that no number has been sent from the public network, the S&R lamp will go off because the number has not been stored.
To redial by Save & Repeat feature
Push the S&R 0/1/2 key after hearing the dial tone.
| NEAX2000 IVS2 |
Page 104 | Business/Hotel/Data Features and Specifications |
