PROPRIETARY MULTILINE TERMINAL
Automatic Idle Return
PROPRIETARY MULTILINE TERMINAL
General Description
There are four Multiline Terminals available which can be used with the system.
•Series E
•Series III
•Electra Professional
The following features apply to these Multiline Terminals.
Automatic Idle Return
General Description
This feature returns a station to the idle state after 3 seconds of reorder tone is received due to the distant end disconnecting.
Station Application
All Multiline Terminals.
Operating Procedure
No manual operation is required.
Service Conditions
1.Automatic Idle Return only applies when the call was made using the Speaker key.
2.The call can be either an internal or external call. If it is an external call, a remote disconnect signal from the C.O. must be supplied.
3.Automatic Idle Return can be allowed or denied on a system basis.
| NEAX2000 IVS2 |
Page 254 | Business/Hotel/Data Features and Specifications |
