NEC NEAX 2000 specifications Private Lines

Models: NEAX 2000

1 367
Download 367 pages 36.36 Kb
Page 275
Image 275

PRIVATE LINES

10.If a station uses a direct trunk line appearance on a Multiline Terminal for an OG calling, the call is origi- nated from the C.O. trunk corresponding to the key pressed.

11.Only C.O. (loop-start and ground-start) trunks and Tie Line trunks can be assigned as private lines.

12.If the designated trunk is busy, the system is able to hunt to the next trunk (following increasing trunk num- ber order). When the route number of the trunk differs from the route number of the original designated trunk, hunting stops and the caller receives busy tone.

13.If a station uses a secondary extension on a Multiline Terminal for an OG calling, the designated trunk for the primary extension of that station is seized.

14.A designated trunk can not be seized unless the route of the trunk access code is the same as the route of that trunk.

15.In the case of an outgoing call from an Attendant Console or a tandem call, a trunk is seized normally, irre- spective of this feature.

16.An Account Code may be entered using a function key programmed for Account Code entry or Account Code can be dialed on second dial tone.

 

NEAX2000 IVS2

Page 252

Business/Hotel/Data Features and Specifications

NDA-24271, Issue 1.0

Page 275
Image 275
NEC NEAX 2000 specifications Private Lines