NEC NEAX 2000 specifications Prime Line Pickup

PROPRIETARY MULTILINE TERMINAL

Prime Line Pickup

Operating Procedure

With a call in progress using handset

1.The terminal receives an incoming extension call directed to the Primary Extension, and hears voice-page alert tone.

2.Respond hands-free (when MIC LED is lit).

3.Press the Answer key to respond with the handset. The original call is automatically put on Non-exclusive Hold.

To set Voice or Tone mode

1.Press the Speaker key.

2.Dial Voice/Tone Programming access code and receive feature dial tone. The LCD will show the current mode of the Multiline Terminal.

3.Dial any single digit (0-9). Voice mode is switched to Tone mode, or vice versa, and Service Set Tone is heard.

4.Press the Speaker key.

Service Conditions

1.This feature is assigned in Class of Service on a per-station basis.

2.This feature is only available for the incoming call to the Primary Extension of a Multiline Terminal with an APR or APA unit.

3.The Multiline Terminal with APR or APA unit requires two time slots: one for primary voice, one for sec- ondary voice. Therefore, the maximum number of Multiline Terminals with APR or APA units is limited by the total number of time slots in the PIM or the system.

4.The voice announcement to a Multiline Terminal in DND is restricted.

5.The voice call on Automatic Intercom/Boss-Secretary Transfer is not affected by the mode programming (Voice/Tone mode) of the called station.

Prime Line Pickup

General Description

This feature allows a Multiline Terminal user to go off hook and originate a call from the line assigned as the Prime Line without pressing the associated line key.

Station Application

All Multiline Terminals.

Operating Procedure

1.Lift the handset or press the Speaker key.

2.Dial tone from the Prime Line is received.

3.Proceed with normal call processing.

	NEAX2000 IVS2
Page 260	Business/Hotel/Data Features and Specifications
	NDA-24271, Issue 1.0