NIGHT SERVICE

Night Connection - Fixed

Station Application

All stations.

Operating Procedure

By dial access code

1.Go off-hook and receive dial tone.

2.Dial the DAY/NIGHT Mode Change feature access code followed by 1 for DAY mode/2 for NIGHT mode/ 3 for MODE-A mode/4 for MODE-B mode.

3.Restore the handset.

By function key on a Multiline Terminal

1.Go off-hook or press the Speaker key and receive dial tone.

2.Press the assigned feature access key.

3.Dial 1 for DAY mode/2 for NIGHT mode/3 for MODE-A mode/4 for MODE-B mode.

4.Restore the handset or press the Speaker key.

Service Conditions

1.This feature is assigned in the station's Class of Service.

2.If using a function key on a Multiline Terminal, the associated lamp will be lit when the tenant changes Day mode to another mode.

Night mode

:Red lamp on

MODE-A mode:Red lamp flashing (60 int)

MODE-B mode :Red lamp flashing (120 int)

3.On a system basis, incoming trunk destination and trunk restriction class can be changed (depending upon programming) when the tenant or system is placed in Night Service.

4.This feature is only available for the tenant without a master Attendant Console.

Night Connection - Fixed

General Description

This feature allows incoming calls normally terminated to the Attendant to reroute to a predetermined station when the system is placed in Night Service.

Station Application

All stations, except fully restricted stations.

Operating Procedure

With an incoming call during Night Service:

1.The outside party hears ringback tone.

2.Ringing signal is sent to the night station.

 

NEAX2000 IVS2

Page 236

Business/Hotel/Data Features and Specifications

NDA-24271, Issue 1.0

Page 259
Image 259
NEC NEAX 2000 specifications Night Connection Fixed