
STATION HUNTING
Station Hunting - Terminal
11.This feature will be activated whenever the hunt group is dialed or terminated under the following condi- tions:
•Dialed from station
•Dialed from Attendant Console
•Dialed from Direct Inward Dialing (DID)
•Dialed from Tie Line
•Terminated by Direct In Termination (DIT)
•Terminated by Hotline - Inside/Outside
•Terminated by
•Terminated by Priority Call
12.The Attendant Console cannot be a member of a hunt group.
Station Hunting - Terminal
General Description
When a pilot number is dialed and that number is busy, sequential Station Hunting will be initiated. However, if a number other than the pilot number is dialed and that number is busy, busy tone will be provided rather than initiate Station Hunting.
Station Application
All stations.
Operating Procedure
No manual operation is required.
Service Conditions
1.If all lines in a hunt group are busy, the caller will receive busy tone.
2.Only calls to the pilot number will initiate a Terminal Hunt. Calls to other stations in the Terminal Hunt group will ring at that station, or receive busy tone.
3.The maximum number of stations that can be included in one Station Hunting group is 60, including the pilot station.
4.When the extension number used as a pilot number has set Call
5.When an extension within the Station
6.When any extension except a pilot in a hunt group has set Do Not Disturb, the extension will be bypassed and Station Hunting continues. When a pilot station has set Do Not Disturb, the calling party will receive reorder tone.
7.There is no limit to the number of Station Hunting - Terminal groups within the system.
| NEAX2000 IVS2 |
Page 292 | Business/Hotel/Data Features and Specifications |