RESIDENT SYSTEM PROGRAM
02 for 4 Wire E&M Tie Lines
03 for Direct Inward Dial lines
•Incoming call indication:
Provided at trunk line appearance LED.
g.Trunk Route Data:
Following data is assigned on a trunk route basis.
•Type of trunk:
RT00 → Direct Distance Dialing
RT01, RT02 → E&M Tie Lines (2W/4W)
RT03 → Direct Inward Dialing
•Type of address signaling for all trunk routes is DTMF for incoming and outgoing calls. Tie Lines are assigned for wink - start operation.
h.System Speed Dialing memory block data:
100 Memory blocks are allocated to tenant 00.
i.Multiline Terminal line key data:
The following data is assigned according to the type of the terminal.
•
Line key 08 - Primary extension
Line keys 01 through 07 - Trunks 000 through 006
•
Line key 16 - Primary extension
Line keys 01 through 04 - Trunks 000 through 003
j.Prime Line
For all Multiline Terminals, the primary extension is assigned as the Prime Line.
k.Memory allocation for Station Speed Dial:
•Multiline Terminals without DSS keys - 10 buffers
•Single Line Telephones - 10 buffers Up to the maximum of 4500 buffers
l.All stations are assigned to tenant 01.
m.Numbering Plan
|
| Numbering Plan | |
|
|
|
|
|
|
| CM 20 |
|
|
|
|
Y (0 - 3) | Access Code | Setting Data | Service Features |
|
|
|
|
0 | 0 | 800 | Operator Call |
|
|
|
|
| 11 | A046 | Call Hold |
|
|
|
|
| 2, 3, or 4 | 803 | First digit of three digit station number |
|
|
|
|
| NEAX2000 IVS2 |
Page 272 | Business/Hotel/Data Features and Specifications |
