PROGRAM /RANDOM
PROGRAM /RANDOM
DISC 1 | DISC 2 | DISC 3 |
Programing the Playing Order of the Tracks
You can change the order in which the discs and tracks play, and select only the discs and tracks you want from among those loaded in the CD Player.
You can program up to 32 steps in any desired order from among the discs in the CD player. You can only make a program when the CD Player is stopped.
On the Unit
1. Press PROGRAM/RANDOM. “PROGRAM” appears on the display and the PROGRAM indicator lights up.
If you have already created a program, the last step of the previous program will appear on the display.
Each time you press the button, CD play mode changes as follows:
=PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the beginning)
2. | Select a disc with DISC (1 to 3). |
| Track number | |||
| The display changes to the Program Entry display | Disc number |
| Step number | ||
|
| |||||
| and the disc number and track number flash |
| ||||
|
|
|
|
|
| |
| for a few seconds. |
|
|
|
|
|
|
|
|
|
|
| |
While the indications are flashing, perform the operations in steps 3 to 4. When the flashing indications change to “PROGRAM”, repeat the operations in steps 2 to 4.
3. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to select a track for programing.
The disc number and track number starts flashing on the display.
Flashing
4. Press SET.
The indications on the display stop flashing and remain lit.
The step number appears on the display.
5.Repeat steps 2 to 4 to select the other tracks for the program.
To select another track from the same disc, repeat the procedure from step 3.
6.Press CD £/8.
The Unit plays the tracks in the order you have programed them.
On the Remote Control
1. Press PROGRAM/RANDOM on the Unit.
“PROGRAM” appears on the display and the PROGRAM indicator lights up. If you have already created a program, the last step of the
previous program will appear on the display unless you have erased the program.
Each time you press the button, CD play mode changes as follows:
=PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the beginning)
2. | Select a disc with DISC (1 to 3). |
| Track number | ||
| The display changes to the Program Entry display | Disc number | Step number | ||
| and the disc number and track number flash |
|
|
|
|
| for a few seconds. |
|
|
|
|
While the indications are flashing, perform the operation in step 3. When the flashing indications change to “PROGRAM”, repeat the operations in steps 2 to 3.
17
