Specifications | JVC MX-D402T specification

Specifications

Amplifier Section
Output Power	80 watts per channel, min. RMS at 6 ohms at 1 kHz,
	with no more than 3% total harmonic distortion.
Input Sensitivity/Impedance (1 kHz)
AUX	300 mV/50 kohms
Speaker terminals	6 - 16 ohms
Cassette Deck Section
Frequency Response
Type II (CrO2) :	50 - 14,000 Hz
Type I (NORMAL) :	50 - 14,000 Hz
Wow And Flutter	0.15% (WRMS)
CD Automatic Changer Section
CD Capacity	3 discs
Dynamic Range	85 dB
Signal-To-Noise Ratio	90 dB
Wow And Flutter	Unmeasurable
Tuner Section
FM Tuner
Tuning Range	87.5 - 108.0 MHz
AM Tuner
Tuning Range	530 - 1,710 kHz
Dimensions	265 × 315 × 340 mm (W/H/D)
	(10-7/16 × 12-7/16 × 13-7/16 inches)
Mass	7.8 kg (17.2 lbs)
Speaker Specifications
SP-D402
Type	3-way, 3-speaker bass-reflex type
Speaker	2 cm (13/16 inches) dome × 1
Tweeter	2 cm (13/16 inches) dome × 1
Midrange	5 cm (2 inches) cone × 1
Woofer	16 cm (6-5/16 inches) cone × 1
Power Handling Capacity	80 W
Impedance	6 ohms
Frequency Range	46 - 20,000 Hz
Sound Pressure Level	87 dB/w • m
Dimensions	215 × 315 × 271 mm (W/H/D)
	(8-1/2 × 12-7/16 × 10-11/16 inches)
Mass	3.3 kg (7.3 lbs)
Accessories
	AM Loop Antenna (1)
	Remote Control (1)
	Batteries R6P (SUM-3)/AA (15F) (2)
	FM Wire Antenna (1)
Power Specifications
Power Requirements	AC 120 V , 60 Hz
Power Consumption	115 watts
	12 watts (in standby mode)

Design and specifications are subject to change without notice.

35

Image 37

JVC MX-D402T manual Specifications

Contents

MX-D402T Important for Laser Products Installation of the Unit FeaturesPower cord How This Manual Is Organized Table of Contents How to Put Batteries in the Remote Control AccessoriesUsing the Remote Control Getting Started Connecting the AM Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable not supplied Connecting Auxiliary Equipment Connecting the SpeakersVCR or other equipment Right Speaker On the Unit On the Remote ControlCompu Play buttons Common Operations Demo ModeDisplay Turning the Power On and Off Setting the ClockAdjusting the Volume Turning the System On Sound Modes Reinforcing the Bass Sound Changing the Display Customizing a Sound Mode Listening to Auxiliary Equipment Turn down the volume level to Press AUX Tuning in a Station Using the TunerSwitching between Frequency Bands On the Unit Press FM/AM Changing the FM Reception Mode Presetting StationsThree Ways to Select a Station Entering CD Operation Mode with the Remote Control Using the CD PlayerDisc indicator CD indicator Loading CDs Basics of Using the CD Player Continuous PlayPlaying a CD Selecting a Track Locating a Track with the Remote Control DirectlyFast Forward / Reverse Changing Discs While Playing Programing the Playing Order of the Tracks On the Remote Control Press PROGRAM/RANDOM on the UnitSelect a disc with Disc 1 to Track number Checking the Program Random PlayChanging the Program Press the number keys 1 to 10 and +10 to select the tracks Tray Lock Function Repeating a Track or the DiscsLocking the Trays Unlocking the Trays Entering the Tape Operation Mode with the Remote Control Using the Cassette DeckTape Direction Indicator on the Display Tape ª £ Music Scan Regular PlayFast Left And Fast Right Finding the Beginning of the Current Selection Reverse Mode on Reverse Mode OFF Reverse Mode Things to Know before You Start Recording Recording Check the recording direction for the tape Standard RecordingPress Tape Control then press To pause at any time during the recording process Auto Edit Recording CD Direct RecordingRecording AM Station to Tape Tape to Tape Recording Dubbing How to Use DubbingPress Dubbing To stop dubbing, press 7STOP Sleep Using the Timer Press TIMER/CLOCK again Setting the Daily TimerSet the time you want the Unit to turn on Set the time you want the Unit to turn off Setting the volume level Turning the Daily Timer On and OffTo change the Daily Timer setting To use a Cassette Deck as the source Setting the Recording Timer Turning the Recording Timer On and Off Setting the Sleep TimerTo change the Recording Timer setting To change the Sleep Timer setting Example Setting Operation Timer PriorityRecording Timer Sleep Timer Care and Maintenance Symptom TroubleshootingPossible Cause Action Specifications Don’t service it yourself HOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 0398TNMNATJEM