SLEEP
To change the Recording Timer setting
Repeat the setting procedure from the beginning.
Turning the Recording Timer On and Off —————————
Once the Recording Timer has been used, the setting is maintained but the Timer is set to off.
To turn the Recording Timer off before the timer starts, press TIMER/CLOCK repeatedly until “REC” appears on the display, then press CANCEL/DEMO. The REC indicator goes out.
To record at the same time again, press TIMER/CLOCK repeatedly until “REC” appears on the display, then press SET. The
CAUTION: If the Unit is unplugged, or a power failure occurs, the timer setting will be erased in a few days. If the settings are erased in this way, reset the timer settings.
Setting the Sleep Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting this timer, you can fall asleep to music and know your Unit will turn off by itself rather than play all night.
You can only set the Sleep Timer when the Unit is on and a source is playing.
To set the SLEEP Timer, follow this procedure:
1.With the Unit on and a source playing, press SLEEP on the Remote Control.
“SLEEP” appears on the display.
2.Set the length of time you want the source to play before shutting off.
•Each time you press this button while the “SLEEP” indicator is flashing, it changes the number of minutes shown on the display in this sequence:
= 10 = 20 = 30 = 60 = 90 = 120 =Canceled =(back to the beginning)
When the number of minutes you want shows on the display, just wait 5 seconds until the indicator stops flashing, and remains lit.
The Unit is now set to turn off after the number of minutes you set.
To change the Sleep Timer setting
Press SLEEP until the number of minutes you want appears on the display.
To cancel the Sleep Timer setting
Press SLEEP until the SLEEP indicator goes out on the display.
Turning off the Unit also cancels the Sleep Timer.
31
