Connecting Other Equipment
You can connect an audio equipment — used only as a playback device.
When you connect and use this equipment, refer also to its manual.
English
Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
• DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect audio equipment
110V-
127V
220V-
240V
AC CORD
FM 75COAXIAL
AM ANT
AUX I N
R L
SPEAKERS
IMPEDANCE
+
L
–
–
R
+
110V-
127V
220V-
240V
FM 75 | COAXIAL |
|
| AM ANT |
|
| AUX I N | |
| R | L |
|
| SPEAKERS |
| IMPEDANCE | |
110V- |
|
|
127V | + |
|
|
| |
220V- | L |
|
240V |
|
|
| – |
|
| – |
|
| R |
|
| + |
|
Audio equipment |
|
|
|
| To audio output |
Connect the audio output jacks on the other equipment and the AUX IN jacks on the rear, using an audio cord (not supplied).
Using a tool with sharp tips such as a ballpoint pen, set the voltage selector to the correct voltage range position matching your local voltage. (See the back cover page.)
NOW, you can plug in the unit and other connected equipment FINALLY!
FM 75COAXIAL
AM ANT
AUX I N
R L
SPEAKERS
IMPEDANCE
110V-
127V
| + |
220V- | L |
240V |
|
| – |
| – |
| R |
AC CORD | + |
To a wall outlet
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
• DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
To start the display demonstration
Press DEMO while the unit is turned off (on stand by).
COUNTER
RESET
DEMO
To stop the display demonstration, press any button.
– 8 –