Using the Microphone

English

You can enjoy singing along and microphone mixing.

The MIC LEVEL control adjustment is valid for microphone connected to the MIC jack.

IMPORTANT:

Always set MIC LEVEL to MIN when connecting or disconnecting the microphone.

When you do not use the microphone, keep the microphone unconnected.

Singing Along

Vocal Masking

Vocal Masking reduces the lead vocal of the playing source, and allows you to replace it by singing into the microphone as the music plays.

1

Rotate MIC LEVEL to MIN.

MIC LEVEL

 

2

Connect the microphone (not

MIN MAX

 

supplied) by plugging it into the MIC jack.

3 Start playing the source — CD, tape, or other connected component.

If howling or squealing (feedback) occurs while using the microphone

Take the following actions to prevent these noises.

Adjust the MIC LEVEL and VOLUME controls

Avoid pointing the microphone towards the speakers.

If you use the following sources as the playing source for Vocal Masking, you cannot get the satisfactory results

Radio programs — a radio signal is not as reliable as the signals coming from a tape or CD.

Monaural sources.

Poorly dubbed tapes.

Sources recorded with duets, strong echo, a chorus, or only a few instruments.

Microphone mixing

When you sing along with multiplex tapes or CDs, follow the procedure below:

On the unit ONLY:

1

Rotate MIC LEVEL to MIN.

MIC LEVEL

 

2

Connect the microphone (not

MIN MAX

 

 

supplied) by plugging it into the MIC jack.

3

Start playing the source — CD, tape or other

4 Press V. MASKING on the remote control.

“V.MASK” appears on the display.

5 Rotate MIC LEVEL and VOLUME controls as you sing into the microphone.

• By pressing REC/PAUSE, you

VOLUME

+

can record your singing along if

 

you want. (For more details, see

 

page 15.)

 

V.MASKING

MIC LEVEL

MIN MAX

 

connected component.

 

4

Rotate MIC LEVEL and

MIC LEVEL

 

 

VOLUME as you sing into the

 

microphone.

MIN MAX

 

VOLUME

 

• By pressing REC/PAUSE, you

 

+

can record your singing along if you want. (For more details, see page 15.)

To use microphone only

Without any background sound, you

can use your microphone, and record it if you want.

To apply an echo to your voice

Press ECHO on the front panel so that the echo indicator lights up on the display. Each time you press the button, the echo level changes as follows:

ECHO 1

 

ECHO 2

 

( )

( )

ECHO OFF (Canceled)

( )

ECHO

1Rotate MIC LEVEL to MIN.

2Connect the microphone (not supplied) by plugging it into the MIC jack.

3Press CD 3/8, then 7.

No background sound will be heard.

4Rotate MIC LEVEL and VOLUME as you sing or speak into the microphone.

By pressing REC/PAUSE, you can record your singing along if you want. (For more details, see page 15.)

As the number increases, a stronger echo effect applies to your voice.

– 16 –

Page 21
Image 21
JVC MX-J100 manual Using the Microphone, Singing Along