English
Recording
IMPORTANT:
•It may be unlawful to record or play back copyrighted material without the consent of the copyrighted owner.
•The recording level is automatically set correctly, so it is not affected by the VOLUME control. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.
•While recording, you can hear tunes with sound modes and/or the active bass extension effect through the speakers or headphones. However, the sound is recorded without these effects (see page 10).
•If the sound recorded have excessive noise or static, the unit may be too close to a TV. Please separate the TV from the unit.
•You can use only type I tapes for recording.
Recording Tapes on Deck B
1 Press EJECT 0for the deck B.
0 EJECT
2 Put in a recordable cassette, with the exposed part of the tape down.
3
4 Start playing the source — FM, AM, CD player, or auxiliary equipment connected to AUX jacks.
•When the source is CD, you can also use CD Direct Recording.
5 Press REC/PAUSE.
REC/PAUSE
Start recording.
The REC indicator lights up on the display and recording starts.
To stop during recording, press 7.
To stop recording temporarily, press REC/PAUSE on the unit. The REC indicator starts flashing on the display.
To resume recording, press REC/PAUSE again.
To remove the cassette, press EJECT 0for deck B.
Resetting the Tape Counter
If you wish to take a note on the counter value at the beginning of each track, reset the counter before starting a recording.
Press COUNTER RESET on the unit | RESET |
| COUNTER |
to reset the counter. | DEMO |
The counter reading becomes “0000.” |
|
• The counter reading also becomes “0000” |
|
when the unit is turned off (stands by). |
|
Dubbing Tapes
1 Press TAPE 3, then 7.
TAPE
2 Put the source cassette in deck A, and a recordable cassette into deck B.
3 Press A 3B DUBBING.
A 
B
Dubbing starts. | DUBBING |
“DUBBING” and REC indicators light up on |
|
the display. |
|
To stop during dubbing, press 7.
To remove the cassette, press 0 EJECT for deck A and EJECT 0for deck B.
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play.
1 | Put a recordable cassette into deck B. |
|
|
| ||
2 | Place a disc correctly on the circle of the disc | |||||
| tray, with its label side up. |
|
|
|
|
|
3 | Press one of the disc number | CD1 CD2 CD3 | ||||
| buttons (CD 1 to CD 3) to |
|
|
|
|
|
|
|
|
|
|
| |
| select the disc, then 7. |
|
|
|
|
|
4 | Press CD REC START. |
|
| CD REC | ||
| “SYNCHRO” appears, and the | START | ||||
REC and 1CD indicator light up on the display.
Deck B starts recording and the CD player starts playing.
When the recording is done, the CD player and deck B stop.
To stop during CD Direct Recording, press 7.
To remove the cassette, press EJECT 0for deck B.
