Continued
English
7 When selecting “FM” or “AM.”
Press 4 or ¢ to select the |
|
preset station number, then press |
|
PROGRAM/SET. |
|
The unit enters recording timer |
|
setting mode. |
|
If you want to continue the Recording |
|
Timer setting, go to step 3 of the |
|
Recording Timer setting procedure. | PROGRAM/SET |
3 Press PROGRAM/SET.
“ON TIME” appears for 2 seconds, then | PROGRAM/SET |
| |
the unit enters |
|
|
|
|
|
8 Press CLOCK/TIMER. | CLOCK/TIMER |
The
indicator stops flashing and remains lit.
If you have set the Daily Timer with the unit turned on, turn off the unit.
Using Recording Timer
With Recording Timer, you can make a tape of a radio broadcast automatically.
How Recording Timer actually works
The unit automatically turns on, tunes into the specified station, sets the volume level to the preset level and starts recording when the
The timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•If you have made a mistake while setting the timer, press CLOCK/TIMER once and start from step 1 again.
4 Set the on-time you want the unit to turn on.
1)Press 4 or ¢to set the hour, then press PROGRAM/
SET. |
|
2) Press 4 or ¢to set the |
|
minute, then press |
|
PROGRAM/SET. |
|
“OFF TIME” appears for 2 seconds, |
|
then the unit enters |
|
mode. | PROGRAM/SET |
5 Set the off-time you want the unit to turn off (on standby).
1)Press 4 or ¢to set the hour, then press PROGRAM/ SET.
2)Press 4 or ¢to set the minute, then press PROGRAM/ SET.
The unit enters the volume setting
mode. | PROGRAM/SET |
On the unit ONLY:
1 Put a recordable cassette into deck B.
2 Press CLOCK/TIMER until “ | CLOCK/TIMER |
REC” appears on the display. |
|
| |
|
The 
indicator also starts flashing on the display.
•Each time you press the button, the timer setting modes change as follows:
Clock time 
CLOCK
REC 
TIMER
6 Set the volume level when the unit is turned on.
Press 4or ¢ to set the volume, then press PROGRAM/ SET.
The unit enters source selecting mode. | PROGRAM/SET |
|
– 18 –
