JVC MX-J585V English, On the unit ONLY, CONT” appears on the display, Adjust the SEA pattern

English

Creating Your Own Sound Mode — Manual Mode

You can change SEA pattern to suit your preference. These changed setting can be stored in the MANUAL 1, 2, and 3 modes.

•There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

•If you want to add the surround elements in your SEA pattern, select one of the surround modes (D.CLUB, HALL, or STADIUM) before starting the procedure below.

On the unit ONLY :

1 Press and hold SEA CONTROL kuntil “SEA	SEA CONTROL
	SET
CONT” appears on the display.

Current level appears.

2 Adjust the SEA pattern.

5 Press SEA CONTROL k again.	SEA CONTROL
	SET
	SOUND MODE

The SOUND MODE indicator also lights up.

The SEA pattern you have created are stored into the MANUAL mode selected in the above step.

To use your own sound mode

select MANUAL 1, 2 or 3 mode when using the sound modes. See "Selecting the Sound Modes".

1)Press 4 ; or ¢ ; to select the frequency range to adjust (LOW, MID, HIGH).

2)Press 1x or Áx to adjust the level (– 3 to +3) of the selected frequency range.

3)Repeat steps 1) and 2) to adjust the level of the other frequency ranges.

3 Press SEA CONTROL k again.

PRESET

PREV NEXT

TUNING

SEA CONTROL

SET

4 Press 4 ; or ¢ ; to select one of the

MANUAL 1, 2 and 3 modes into which you want to store the SEA pattern.

9