English, Repeating Tracks or CDs - Repeat Play, Prepare CDs

To check the program contents

Before playing, you can check the program contents by pressing

1/ 49 or ¢/ Á* on the remote control.

•¢/ Á: Shows the programmed tracks in the programed order.

•1/ 4: Shows them in the reverse order.

To modify the program

Before play, you can erase the programmed tracks	DEMO
Before play, you can erase the programmed tracks	CANCEL
shown on the display by pressing CANCEL /.

•Each time you press the button, the programmed track shown on the display is erased from the program.

To add tracks in the program before play, simply select the track numbers you want to add by following step 4 of the program- ming procedure on page 11.

To erase the entire program before or after play, press

7 z, _.

“PROGRAM” appears on the display.

•Ejecting a CD will also erase the track numbers programmed from the ejected CD.

To exit from Random play mode, press PROGRAM/RANDOM

vrepeatedly again before or after play so that the unit enters another play mode.

Even if you press 4 ; (or 1/ 4 9 on the remote control)

You cannot go back to the previous tracks during Random play.

•If you press¢ ; (or ¢/ Á* on the remote control), you can go to next random tracks.

•RANDOM PLAY starts playing from the current tray and then subsequently to the next tray when all the tracks from the current tray are finished.

Repeating Tracks or CDs — Repeat Play

You can have all the CDs, the program or the individual track currently playing repeat as many times as you like.

English

If you try to program a 33rd step

To repeat play, press REPEAT n during or before playing. To use Repeat play for Program play and Random play, press the button after starting playback.

REPEAT

“FULL” will appear on the display.

If your entry is ignored

You have tried to program a track from an empty tray, or a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks). Such entries are ignored.

Playing at Random — Random Play

The tracks of all loaded CDs will play at random.

•To use Repeat play for Random play, press REPEAT n after starting Random play.

1 Prepare CDs.

•If the current playing source is not the CD player, press CD 6 y, ), then 7 z, _ before going to the next step.

2 Press PROGRAM/RANDOM v repeatedly					PROGRAM
2 Press PROGRAM/RANDOM v repeatedly					/ RANDOM
until “RANDOM” appears on the display.
	1	2	3	4
	1	2	3	4
	5	6	7	8
	9	10	11	12
	RANDOM 13	14

• Each time you press the button, CD play mode changes as follows:

Program Play Random Play

Continuous Play

3 Press CD 6 y, ).

The tracks are played at random.

Random play ends when all the tracks are played C D once.

To stop during play, press 7 z, _.

• Random play also stops when the current disc tray is opened.

•Each time you press the button, Repeat play mode changes as follows, and the following indicator lights up on the display:

REPEAT ALL REPEAT 1CD

CancelledREPEAT 1

(Continuous play)

REPEAT ALL: Repeats all the tracks on all the CDs (continuously or at random), or all the tracks in the program.

REPEAT 1CD*: Repeats all the tracks on one CD.

REPEAT 1**: Repeats one track on one CD.

*REPEAT 1CD is not used for Program play and Random play. **REPEAT 1 is not used for Random play.

To cancel Repeat play, press REPEAT n repeatedly until the REPEAT indicator (REPEAT ALL, REPEAT 1CD, or REPEAT 1) goes off from the display.

•Repeat play is also cancelled when you select Program play or Random play.

Prohibiting Disc Ejection — Tray Lock

You can prohibit CD ejection from the unit and can lock discs.

• This operation is possible only using the buttons on the unit.

To prohibit disc ejection, press 0 e for any disc tray while holding 7 z, _. (If there is any disc tray opened, close it first.) “LOCKED” appears for a while, and the loaded CDs are locked.