Using the Timers
English
There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.
3 Set the on-time you want the unit to turn on.
PRESET
PREV NEXT
Before using the timers, you need to set the clock built in the unit. (See page 7.)
Using Daily Timer
1)Press 4; or ¢; to set the hour, then press SET k.
2)Press 4 ; or ¢; to set the minute, then
press SET k. | SEA CONTROL |
“OFF TIME” appears for 2 seconds, then the unit | SET |
| |
enters |
|
With Daily Timer, you can wake to your favorite music or radio program.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the
(the indicator flashes just before the
4 Set the
1)Press 4; or ¢; to set the hour, then press SET k.
2)Press 4 ; or ¢; to set the minute, then press SET k.
The unit enters source selecting mode.
PRESET
PREV NEXT
SEA CONTROL
SET
flashing while the timer is operating). Then, when the
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the setting is |
cancelled before you finish, start from step 1 again. |
DAILY |
P |
R |
5 | PRESET |
Press 4; or ¢; to select the |
• If you have made a mistake while setting timer, press CANCEL |
/. (However, this does not always work. If CANCEL does not |
source to play, then press SET k.
PREV NEXT
work, press TIMER/CLOCK h repeatedly and start from step 1 |
again.) |
On the unit ONLY:
1 Press TIMER/CLOCK h until “DAILY” | /CLOCK |
| TIMER |
appears on the display. |
|
DAILY |
|
The DAILY indicator also starts flashing on the display.
•Each time you press the button, the timer setting modes change as follows:
|
| DAILY |
|
|
| ON TIME |
|
| REC | |
|
|
|
|
|
| |||||
| Cancelled |
|
| Clock |
|
| ON TIME | |||
|
|
|
|
| ||||||
|
|
|
|
| setting |
|
|
| ||
|
|
|
| (See page 7.) |
|
|
| |||
2 Press TIMER/CLOCK h again. | TIMER |
| /CLOCK |
“ON TIME” appears for 2 seconds, then the unit enters
•Each time you press 4 ; or ¢ ;, the source changes as follows:
TUNER FM
TUNER AM 
SEA CONTROL
SET
AUX
TAPE
– CD – – – 
TUNER FM: tunes into a specified preset FM station. =go to step 6.
TUNER AM: tunes into a specified preset AM station.
= go to step 6.
–CD – –
• Make sure there is a CD on the selected disc number tray.
TAPE: plays a tape in deck A or B. = go to step 7.
•Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.
•Make sure that the tape direction is correct.
AUX: plays an external source. =go to step 7.
•To use this setting, the external component has to be equipped with the timer function.
DAILY 
DAILY 
24
Continued
