JVC MX-J585V English, When selecting “- CD - - -”, Press 4 or ¢ to set the, volume level, setting

English

PRESET

6 When selecting “– CD – – –”.

PREV NEXT

1) Press 4 ; or ¢ ; to select the disc number, then press SET k.

2) Press 4 ; or ¢ ; to set the track number, then press SET k.

The unit enters volume setting mode.

SEA CONTROL

SET

When selecting “TUNER FM” or “TUNER AM”

Press 4; or ¢; to select the preset station number, then press SET k.

The unit enters volume setting mode.

7	Press 4 ; or ¢; to set the	PRESET
	volume level.	PREV	NEXT

•You can select the volume level from among four levels. If you select “ VOL – – –,” the vol-

ume is set to the last level when the unit has been turned off.

		DAILY
8			SEA CONTROL
	Press SET k to complete the Daily Timer
			SET

setting.

The DAILY indicator stops flashing and remains lit.

The setting you have done are shown on the display in sequence.

STANDBY

9 Press 2, !to turn off the unit (on standby) if you have set the Daily Timer with the unit turned on.

To turn on or off Daily Timer after its setting is done

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, sets the volume level to “0,” and starts recording when the on-time comes (the β indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” appears just before the off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

•If you have made a mistake while setting the timer, press CANCEL /. (However, this does not always work. If CANCEL does not work, press TIMER/CLOCK h repeatedly and start from step 1 again.)

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press TIMER/CLOCK h until “REC”		/CLOCK
		TIMER
appears on the display.
The REC indicator also starts flashing on the display.
	REC

•Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

Cancelled		Clock	ON TIME
	setting

1.Press TIMER/CLOCK h repeatedly until "DAILY" appears on the display.

2.To turn off the Daily Timer, press CANCEL /. The DAILY indicator goes off from the display. The Daily Timer is cancelled, but the setting for the Daily Timer remains in memory.

To turn on the Daily Timer, press SET k. The DAILY indicator lights up on the display.

The setting you have done are shown on the display in sequence for your confirmation.

TIMER /CLOCK

DEMO

CANCEL

SEA CONTROL

SET

	(See page 7.)
3	Press TIMER/CLOCK h again.	TIMER
		/CLOCK

“ON TIME” appears for 2 seconds, then the unit enters on-time setting mode.

REC

If the unit is turned on when the timer-on timer REC

come

Daily Timer does not work.

25 Continued